Automatic Contact IC Card Slotter And Milling Machine YIM-4000+ IC Chip Implanting On Plastic Card
Automatic IC Card Milling Machine/ IC card Slot Milling Machine/Contact IC card Slotter YIM-4000+
( Contact IC card slot milling machine, Contact IC card slotter, Card machine, smart card production machine)
1. Introduction of Automatic Contact IC Card Slotter And Milling Machine YIM-4000+ IC Chip Implanting On Plastic Card
Automatic IC Card Milling Machine YIM-4000+ is designed for milling the slot or cavity for IC chip implanting on plastic card surface in a precise and speedy way. It features robust design, reliable performance and fully automatic operation. It is controlled by PLC, which can well ensure easy parameter setting and stable performance.
Basic configuration:
Card feeding magazines (two) –slot milling station #1-slot milling station #2-depth detection stations (two)(optional)-dust absorber -Card Collection magazines (two)
2. Features of Automatic Contact IC Card Slotter And Milling Machine YIM-4000+ IC Chip Implanting On Plastic Card
- Double-card conveying system can ensure that two cards are milled at the same time in a speedy way.
- Three-shaft positioning control system drives servo motor to mill the slots of plastic cards.
- The parameters of each shaft can be adjusted respectively, and the milling precision can’t be affected by the diameter tolerance of the milling tool.
- If such problems as card overlapping, wrong card direction or wrong milling depth (checked by the optional depth detection station), the machine will automatically alarm and stop.
3. Technical Parameter of Automatic Contact IC Card Slotter And Milling Machine YIM-4000+ IC Chip Implanting On Plastic Card
| Power supply | AC 380V 50/60 HZ | Control method | PLC + Servo system |
| Total power | 6.0 KW | Card specification | ISO CR80/IEC7810 54x85.6mm |
| Air source | 6kg/cm² (dry) | Dimension | Approximately L1750xW800xH1850 mm |
| Air consumption | Approx. 50L/min | Milling precision | X/Y: ±0.015mm Z: ±0.010mm |
| weight | Approx 650Kg | Operator | 1 Person |
| Speed | 3500~4500pcs/h | | |
4. Application of Automatic Contact IC Card Slotter And Milling Machine YIM-4000+ IC Chip Implanting On Plastic Card
It is controlled by PLC, which can well ensure easy parameter setting and stable performance.
|
|
PLC + Servo system Contact IC Card Slotter And Milling Machine YIM-4000+ IC Chip Implanting For Plastic Card Images
|
